Command Reference WIDS Commands
device permit vendor bssid H.H.H
no device permit vendor bssid H.H.H
Parameter
Description
Parameter Description
H.H.H
The parameter indicates this vendor’s address is a permissible
address.
no
The parameter indicates that you delete a permissible vendor entry.
Defaults
There is no permissible vendor entry by default.
Command
mode
WIDS configuration mode.
Usage Guide
The vendor number is used to configure the first three bytes of a MAC address. Do not configure
multiple MAC addresses with the same vendor number. This configuration is one of the policies for
detecting Rogue devices.
Configuration
Examples
#Set the MAC address 0011.2200.0001 as a permissible vendor address.
Ruijie(config)# wids
Ruijie(config-wids)# device permit vendor bssid 0011.2200.0001
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
device permit vendor bssid max
Use this command to configure the maximum number of permissible vendor list members.
Use the no form of this command to restore the default setting.
device permit vendor bssid max number
no device permit vendor bssid max
Parameter
Description
Parameter Description
number
Specifies the maximum number of permissible vendor list members.
Value range: 1 to 1024
no
Restores the maximum number of permissible vendor list members to
512.
Defaults
The maximum number of permissible vendor list members is 512 by default.