Command Reference NFPP Commands
mac-address ] ] ]
Parameter
Description
Parameter Description
statistics Show the statistical information of the monitored host.
vid
The VLAN ID.
interface-id
The interface name.
ip-address
The IP address.
mac-address
The MAC address.
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
N/A
Configuration
Examples
The following example shows the statistical information of the monitored host:
Ruijie# show nfpp arp-guard hosts statistics
success fail total
------- ---- -----
100 20 120
The following example shows the monitored host:
Ruijie# show nfpp arp-guard hosts
If column 1 shows '*', it means "hardware do not isolate user" .
VLAN interface IP address MAC address remain-time(s)
---- -------- --------- ----------- -------------
1 Gi0/1 1.1.1.1 - 110
2 Gi0/2 1.1.2.1 - 61
*3 Gi0/3 - 0000.0000.1111 110
4 Gi0/4 - 0000.0000.2222 61
Total:4 hosts
Related
Commands
Command Description
clear nfpp arp-guard hosts
Clear the monitored host.
Platform
Description
N/A
show nfpp arp-guard scan
Use this command to show the ARP scan list.
To Next Page
Loading...
