Ruijie RG-WLAN Series Rgos Command Reference

Command Reference 802.1X Commands
Configuration
Examples
The following example demonstrates how to set the maximum number of authentication requests to
7:
Ruijie# configure terminal
Ruijie(config)# dot1x max-req 7
Ruijie(config)# end
Ruijie#
Related
Commands
Command Description
show dot1x Shows the information about 802.1x.
Platform
Description
N/A
dot1x offline-detect
The low flow detect is used to detect whether the flow of the terminal is lower than the designated
threshold value. If it is, the terminal is logged out. By default, this function is enabled. The default
detect time is 15 minutes and the detect flow is 0 byte. Use the no option of this command to restore
the setting as the default value.
dot1x offline-detect flow interval val flow num
no dot1x offline-detect
Parameter
Description
Parameter Description
val
This parameter detects the period.
num
This parameter detects the threshold value.
Defaults
The default values are 15 minutes and 0 byte.
Command
Mode
Global configuration mode and WLANSEC configuration mode.
Usage Guide
By default, this function is enabled. It is helpful to solve wrong fee-deduction problems due to
abnormal terminal offline.
Configuration
Examples
The following example demonstrates how to set the 802.1x flow detect:
Ruijie# configure terminal
Ruijie(config)# wlansec 1
Ruijie(config-wlansec)dot1x offline-detect interval 10 flow 10
Ruijie(config-wlansec)# end
Related
Command Description

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English