Ruijie RG-WLAN Series

Command Reference Dot11 Radio Commands
Platform
Description
N/A
interface dot11radio
Use this command to set the dot11radio interface or sub-interface and enter dot11radio interface
configuration mode.
interface dot11radio interface-name
no interface dot11radio interface-name
Parameter
Description
Parameter Description
no
Deletes dot11radio sub-interface
interface-name
Specifies the Dot11radio interface number, including the
sub-interface number.
Defaults
N/A
Command
mode
Global configuration mode
Usage Guide The no form of this command is only applicable to sub-interface.
Configuration
Examples
# Enter dot11radio interface configuration mode.
Ruijie(config)#interface dot11radio 1/0
Ruijie(config-if-Dot11radio 1/0)#
# Enter dot11radio sub-interface configuration mode.
Ruijie(config)#interface dot11radio 1/0.1
Ruijie(config-subif)#
# Delete the dot11radio sub-interface configuration.
Ruijie(config)#no interface dot11radio 1/0.1
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
antenna
Use this command to set parameters for transmitting and receiving antennas.
antenna { receive | transmit } chain-mask