Ruijie RG-WLAN Series Rgos Command Reference

Command Reference RADIUS Commands
RADIUS Commands
ip radius source-interface
Use this command to specify the source IP address of the RADIUS packet in global configuration
mode.
Use the no form of this command to delete the source IP address of the RADIUS packet.
ip radius source-interface interface
no radius source-interface
Parameter Description Parameter
Description
Interface
Interface that the source IP address of the RADIUS packet belongs to
Defaults
The source IP address of the RADIUS packet is set by the network layer by default.
Command
Mode
Global configuration mode
Usage Guide
In order to reduce the NAS information to be maintained on the RADIUS server, use this
command to set the source IP address of the RADIUS packet. This command uses the first IP
address of the specified interface as the source IP address of the RADIUS packet. This command
is used on Layer 3 devices.
Configuration
Examples
The following example specifies that the RADIUS packet obtains an IP address from the
fastEthernet 0/0 interface and uses it as the source IP address of the RADIUS packet.
Ruijie(config)# ip radius source-interface
fastEthernet 0/0
Command Description
radius-server host
Defines the RADIUS server.
Related
Commands
ip address
Configures the IP address of an interface.
Platform
Description
N/A

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English