EasyManuals Logo

Ruijie RG-WLAN Series Rgos Command Reference

Ruijie RG-WLAN Series
657 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
Command Reference Dot11 Radio Commands
Parameter
Description
Parameter Description
no
Deletes the setting of short GI.
20
Short GI in the channel width of 20 MHz.
40
Short GI in the channel width of 40 MHz.
Defaults
By default, short GI cannot be enabled in the channel bandwidth of 20 MHz, but can be enabled in the
channel bandwidth of 40 MHz.
Command
mode
Dot11radio interface configuration mode
Usage Guide
Short GI in the channel width of 20 MHz is not supported on some products.
Configuration
Examples
# Enable short GI in the channel width of 20 MHz.
Ruijie(config)#interface dot11radio 1/0
Ruijie(config-if-Dot11radio 1/0)# short-gi enable chan-width 20
# Disable short GI in the channel width of 20 MHz.
Ruijie(config)#interface dot11radio 1/0
Ruijie(config-if-Dot11radio 1/0)# no short-gi enable chan-width 20
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
short-preamble
Use this command to set a preamble for a radio.
short-preamble
no short-preamble
Parameter
Description
Parameter Description
no
Sets a long preamble.
Defaults
The default setting is short preamble in 2.4 GHz frequency band while long preamble in 5 GHz.
Command
mode
Dot11radio interface configuration mode

Table of Contents

Other manuals for Ruijie RG-WLAN Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ruijie RG-WLAN Series and is the answer not in the manual?

Ruijie RG-WLAN Series Specifications

General IconGeneral
BrandRuijie
ModelRG-WLAN Series
CategoryWireless Access Point
LanguageEnglish

Related product manuals