Ruijie RG-WLAN Series Rgos Command Reference

Command Reference Dot11 Radio Commands
Usage Guide
This command only takes effect when the AP operates in 2.4 GHz frequency band. The default
setting is long preamble in 5 GHz frequency band, which cannot be modified.
Configuration
Examples
# Set the short preamble.
Ruijie(config)#interface dot11radio 1/0
Ruijie(config-if-Dot11radio 1/0)# short-preamble
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
response-rssi
Use this command to set the minimum value of the received signal strength indicator (RSSI) for a
wireless client to connect to the AP. If a wireless client's RSSI is less than this value, this client is not
allowed to associate with this AP.
response-rssi rssi-value
no response-rssi
Parameter
Description
Parameter Description
no
Deletes a RSSI value.
rssi-value
Specifies the RSSI. The range is from 0 to 100 dBm.
Defaults
The default value is 0.
Command
mode
Dot11radio interface configuration mode
Usage Guide
N/A
Configuration
Examples
# set the RSSI value for wireless access.
Ruijie(config)#interface dot11radio 1/0
Ruijie(config-if-Dot11radio 1/0)# response-rssi 10
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English