Ruijie RG-WLAN Series Rgos Command Reference

Command Reference 802.1X Commands
Description
dot1x dhcp-before-acct enable
Use this command to enable the accounting function after the IP address is obtained in global
configuration mode. Use the no form of this command to restore the default settings.
dot1x dhcp-before-acct enable
no dot1x dhcp-before-acct enable
Parameter
Description
Parameter Description
N/A N/A
Defaults
This function is disabled by default.
Command
Mode
Global configuration mode.
Usage Guide
Use the show running-config command to view the setting.
Configuration
Examples
The following example only uses a private client :
Ruijie# configure t
Ruijie(config)# dot1x dhcp-before-acct enable
Ruijie(config)# end
Ruijie#
Related
Commands
Command Description
show dot1x Shows the information about 802.1x.
Platform
Description
N/A
dot1x dhcp-before-acct timeout time
Use this command in global configuration mode to configure the timeout period of the accounting
function which is enabled after the IP address is obtained. Use the no form of this command to
restore the default settings.
dot1x dhcp-before-acct timeout time
no dot1x dhcp-before-acct timeout

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English