Command Reference IP Address Commands
IP address is: Shows the IP address and mask of the interface.
IP address negotiate is: Shows whether to obtain the IP address through negotiation.
Forward
direct-broadcast is:
Shows whether to forward directed broadcast packets.
ICMP mask reply is: Shows whether to send ICMP mask response messages.
Send ICMP redirect is: Shows whether to send ICMP redirection messages.
Send ICMP
unreachabled is:
Shows whether to send ICMP unreachable messages.
DHCP relay is: Shows whether DHCP relay is enabled.
Fast switch is: Shows whether the IP fast switching function is enabled.
Route horizontal-split is:
Shows whether horizontal split is enabled, which will affect the route
update behavior of the distance vector protocol.
Help address is: Shows the helper IP address.
Proxy ARP is: Shows whether the proxy ARP is enabled.
ARP packet input
number: 0
Request
packet: 0
Reply
packet: 0
Unknown
packet: 0
Shows the total number of ARP packets received on the interface,
including:
ARP request packets
ARP reply packets
Unknown packets
TTL invalid packet
number:
Shows the number of packets with invalid TTL.
ICMP packet input
number: 0
Echo request:
0
Echo reply:
0
Unreachable:
0
Source quench:
0
Routing redirect:
0
Shows the total number of ICMP packets received on the interface,
including:
Echo request packets
Echo reply packets
Unreachable packets
Source quench packets
Routing redirection packets
Outgoing access list is
Shows whether an outgoing access list has been configured for an
interface.
Inbound access list is
Shows whether an incoming access list has been configured for an
interface.
To Next Page
Loading...
Need help?
General
