Ruijie RG-WLAN Series

Command Reference 802.1X Commands
Parameter
Description
Parameter Description
N/A N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
N/A
Configuration
Examples
The following example shows the information about automatic 802.1x authentication:
Ruijie# show dot1x auto-req
Auto-Req: Disabled
User-Detect : Enabled
Packet-Num : 0
Req-Interval: 30 Seconds
Ruijie#
Related
Commands
Command Description
dot1x auth-mode
Setsthe 802.1x authentication mode.
dot1x max-req
Sets the maximum number of authentication
request retransmissions.
dot1x port-control auto
Sets the port to participate in authentication.
dot1x reauth-max
Sets the maximum number of the supplicant
re-authentications.
dot1x re-authentication
Sets the re-authentication attribute.
dot1x timeout quiet-period
Sets the time the device waits before
reauthentication.
dot1x timeout re-authperiod
Sets the re-authentication period for the
supplicant.
dot1x timeout server-timeout
Sets the authentication timeout between the
device and authentication server.
dot1x timeout supp-timeout
Sets the authentication timeout between the
device and the supplicant.
dot1x timeout tx-period
Sets the retransmission period.
Platform
Description
N/A