Command Reference Port-based Flow Control Commands
show interface { interface-type interface-number } arp-check list
Parameter
Description
Parameter Description
interface-type
interface-number
Displays the ARP check entries of a designated interface.
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
If the parameter is not specified, all ARP check entries will be displayed.
Configuration
Examples
The following example shows how to display the ARP check entries on the interface:
Ruijie#show interfaces arp-check list:
Interface Sender MAC Sender IP Policy Source
---------- -------------- --------------- --------------------
Gi 0/1 00D0.F800.0003 192.168.1.3 address-bind
The following example shows how to display the ARP check entries in the WLANSEC configuration
mode:
Ruijie#show interfaces arp list
Interface Sender MAC Sender IP Policy Source
---------- -------------- --------------- --------------------
WLAN 1 0026.c79f.6e4c 172.168.131.1 web-auth
Related
Commands
Command Description
arp-check
Enables the ARP check function.
Platform
Description
N/A