Command Reference Syslog Commands
Defaults
Local7(23)
Command
Mode
Global configuration mode
Usage Guide
The following table (Table-2) is the possible device values of Syslog:
Numerical Code Facility
0 (kern) Kernel messages
1 (user) User-level messages
2 (mail) Mail system
3 (daemon) System daemons
4 (auth1) security/authorization messages
5 (syslog) Messages generated internally by syslogd
6 (lpr) Line printer subsystem
7 (news) USENET news
8 (uucp) Unix-to-Unix copy system
9 (clock1) Clock daemon
10 (auth2) security/authorization messages
11 (ftp) FTP daemon
12 (ntp) NTP subsystem
13 (logaudit) log audit
14 (logalert) log alert
15 (clock2) clock daemon
16 (local0) Local use
17 (local1) Local use
18 (local2) Local use
19 (local3) Local use
20 (local4) Local use
21 (local5) Local use
22 (local6) Local use
23 (local7) Local use
The default device value of RGOS is 23 (local 7).
Configuration
Examples
The following example sets the device value of Syslog as kernel:
Ruijie(config)# logging facility kern
Related
Command Description
To Next Page
Loading...
Need help?
General
