Ruijie RG-WLAN Series Rgos Command Reference

Command Reference WLAN QoS Commands
no
The parameter indicates that you disable the fair scheduling function
on the AP.
Defaults
This function is enabled by default.
Command
mode
AC: AP configuration mode
AP: configuration mode
Usage Guide
 On a fat AP, the command of configuring fair scheduling is used in configuration mode and you
can use the show run command to show configuration.
 When the AP works in fit AP mode, the fair scheduling can be configured only on the AC.
Configuration
Examples
Example 1: Disable the fair scheduling on the AP.
Ruijie(config)# ap-config ap-name
Ruijie(wids-config)# no fair-schedule
Related
Commands
Command Description
N/A N/A
Platform
Description
This command is supported on ACs and fat APs.
wlan-based
Use this command to configure the upstream and downstream traffic limit of the current WLAN. Use
the no form of this command to restore the default value.
wlan-based { down-streams | up-streams } average-data-rate average-data-rate burst-data-rate
burst-data-rate
no wlan-based { down-streams | up-streams }
Parameter
Description
Parameter Description
per-user-limit
Limit for each user on the WLAN
total-user-limit
Limit for the entire WLAN
down-streams
Total downstream traffic limit of the WLAN
up-streams
Total upstream traffic limit of the WLAN
average-data-rate
average-data-rate
Average rate limit, ranging from 1 to 819200 in 8Kbps
burst-data-rate
burst-data-rate
Burst rate limit, ranging from 1 to 819200 in 8Kbps
no
Restores the traffic limit to the default value.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English