Ruijie RG-WLAN Series Rgos Command Reference

Command Reference WLAN Capture Commands
Usage Guide
Only one set of the username and the password is allowed when configuring remote device login
authentication.
Only when the username and the password are null, can anonymous logins are allowed.
Login authentication must be configured before the WLAN capture service is configured.
Configuration
Examples
Example 1: Configure both the username and the password as “wlan-capture”
Ruijie# configure terminal
Ruijie(config)#wlan-cap
Ruijie(wlan-cap)#rpcap login wlan-capture wlan-capture
Ruijie(wlan-cap)#exit
Related
Commands
Command Description
service enable
Enable the WLAN capture service.
show wlan-cap config
Shows the WLAN capture configuration.
Platform
Description
This command is supported only on the AC and fat AP.
wlan-cap
Use this command to create the WLAN capture service or enter WLAN capture configuration service.
Use the no form of this command to remove the configuration.
wlan-cap
no wlan-cap
Parameter
Description
Parameter Description
N/A N/A
Defaults
By default, the WLAN capture service is disabled.
Command
mode
Global configuration mode
Usage Guide
When this command is executed for the first time, terminals create and enable the WLAN capture
service.
Configuration
Examples
Example 1: create and enable the WLAN capture service.
Ruijie# configure terminal
Ruijie(config)#wlan-cap

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English