Command Reference Basic Management Commands
minutes
Timeout in minutes.
Description
seconds
(Optional) Timeout in minutes
Defaults
The default timeout is 10 minutes.
Command
Mode
Line configuration mode
Usage Guide
If there is no input or output for this connection within a specified time, this connection will expire, and
this LINE will be restored to the free status.
Configuration
Examples
The following example specifies the connection timeout as 5’30’’.
Ruijie(config-line)#exec-timeout 5 30
Command Description
Related
Commands
N/A N/A
Platform
Description
None
hostname
To specify or modify the hostname of a device, run the hostname command in global configuration
mode.
hostname name
Parameter Description Parameter
Description
name
Device hostname, string, number or hyphen, up to 63 characters.
Defaults
The default hostname is Ruijie.
Command
Mode
Global configuration mode
Usage Guide
This hostname is mainly used to identify the device and is taken as the username for the local device
during dialup and CHAP authentication.
Configuration
Examples
The following example configures the hostname of the device as BeiJingAgenda:
Ruijie(config)# hostname BeiJingAgenda
BeiJingAgenda(config)#
Related
Command Description