Command Reference Interface Commands
Related
Commands
Command Description
shutdown
Shutdown the interface.
Platform
Description
N/A
description
Use this command to set the alias of interface.. Use the no form of the command to restore the
default setting.
description string
no description
Parameter
Description
Parameter Description
string
Interface alias
Defaults
By default, there is no alias.
Command
Mode
Interface configuration mode.
Usage Guide Use show interfaces to display the interface information, including the alias.
Configuration
Examples
Ruijie(config)# interface gigabitethernet 1/1
Ruijie(config-if)# description GBIC-1
Related
Commands
Command Description
show interfaces Show the interface information.
Platform
Description
N/A
duplex
Use the duplex command in the interface configuration mode to specify the duplex mode for the
interface. Use the no form of the command to restore it to the default setting.
duplex { auto | full | half }
no duplex