Command Reference SNMP Commands
Defaults
A default view is set to access all MIB objects by default.
Command
mode
Global configuration mode
Usage Guide
None
Configuration
Examples
The following example sets a view that includes all MIB-2 sub-trees (oid is 1.3.6.1).
Ruijie(config)# snmp-server view mib2 1.3.6.1 include
Related
Commands
Command Description
show snmp view
Shows the view configuration.
Platform
Description
N/A
snmp trap link-status
For this command, refer to the INTF-CREF.doc
Parameter
Description
Parameter Description
N/A N/A
Defaults
Refer to the INTF-CREF.doc.
Command
mode
Refer to the INTF-CREF.doc.
Usage Guide
Refer to the INTF-CREF.doc.
Configuration
Examples
Refer to the INTF-CREF.doc
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
To Next Page
Loading...
