Ruijie RG-WLAN Series Rgos Command Reference

Command Reference IPv6 Commands
destination address of the tunnel shall also be the IPv6 address.
Defaults
The destination address encapsulated by the tunnel is not configured by default.
Command
Mode
Interface configuration mode.
Usage Guide
A device shall not be configured multiple tunnels with the same encapsulation type, source address
and destination address.
Note: For auto tunnel 6to4 and isatap, the destination address shall not be configured.
Configuration
Examples
The following example configures an IPv6 manual tunnel.
Ruijie(config)# interface tunnel 1
Ruijie(config-if)# tunnel mode ipv6ip
Ruijie(config-if)# tunnel source vlan 1
Ruijie(config-if)# tunnel destination 192.168.5.1
Command Description
tunnel source
Configure the source IP address of the tunnel.
tunnel mode
Configure the mode of a tunnel.
Related
Commands
Tunnel ttl
Configure the TTL of the tunnel.
Platform
Description
N/A

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English