Ruijie RG-WLAN Series Rgos Command Reference

Command Reference DHCPv6 Commands
show ipv6 dhcp relay destination
Use this command to show the destination information about DHCPv6 Relay Agent.
show ipv6 dhcp relay destination
Parameter Description Parameter
description
all
Show information about all configured destination addresses and
relay exits.
interface interface-type
interface-number
Show the relay destination address and relay exit configured for a
specified interface.
Defaults
-
Command
mode
Privileged mode
Usage
guideline
Use this command to show the relay destination address to which DHCPv6 packets sent from a client
are forwarded through a specified relay exit (optional) by an interface for which the relay function has
been enabled by Relay Agent.
Examples
The example below shows all the relay destination addresses.
Ruijie# show ipv6 dhcp relay destination all
Interface: Vlan1 //interface for which the relay function has been enabled
Destination address(es) Output Interface
3001::2
FF02::1:2 //specified destination address Vlan2 //specified
relay exit
Command Description Related
commands
N/A N/A
Platform
description
N/A
show ipv6 dhcp relay statistics
Use this command to show the packet sending and receiving condition with the DHCPv6 Relay
function enabled.
show ipv6 dhcp relay statistics
Parameter Description Parameter
Description
N/A. N/A.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English