Command Reference DHCPv6 Commands
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
This command is used to show the DHCPv6 server statistics.
Configuration
Examples
Ruijie# show ipv6 dhcp server statistics
DHCPv6 server statistics:
Packet statistics:
DHCPv6 packets received: 7
Solicit received: 7
Request received: 0
Confirm received: 0
Renew received: 0
Rebind received: 0
Release received: 0
Decline received: 0
Relay-forward received: 0
Information-request received: 0
Unknown message type received: 0
Error message received: 0
DHCPv6 packet sent: 0
Advertise sent: 0
Reply sent: 0
Relay-reply sent: 0
Send reply error: 0
Send packet error: 0
Binding statistics:
Bindings generated: 0
IAPD assigned: 0
IANA assigned: 0
Configuration statistics:
DHCPv6 server interface: 1
DHCPv6 pool: 0
DHCPv6 iapd binding: 0
Command Description Related
Commands
ipv6 dhcp pool
Set a DHCPv6 pool.
To Next Page
Loading...
Need help?
General
