Ruijie RG-WLAN Series

Command Reference WLAN-VLAN Mapping Commands
Description
group-id
Specifies the ID of a VLAN group.
Defaults
None
Configuration
Mode
Privileged mode
Usage Guide
None
Configuration
Examples
The following example shows how to display information about VLANs in the VLAN group on
an AP:
Ruijie# show vlan-group
VLAN-Group ID Default VLAN Assign-Mode VLAN-List
------------- ------------ -----------------
-----------------------------
100 10 dhcp-server-state 1-10, 21-30, 51-70
128 NA dot1x 110-130, 141-150
Command Description
Related
Commands
Platform
Description
This command is supported by the RGOS10.4 (1T17) or later versions.