Ruijie RG-WLAN Series Rgos Command Reference

Command Reference Web Authentication Commands
webauth
Use this command to enable Web authentication on WLAN. Use the no form of this command to
disable the Web authentication.
webauth
no webauth
Parameter
Description
Parameter Description
N/A N/A
Defaults
By default, Web authentication on WLAN is disabled.
Command
mode
WLAN security configuration mode.
Usage Guide
By default, the first generation Web authentication is used after being enabled.
Configuration
Examples
# Enable the Web authentication function on port WLAN 1, and use Ruijie first generation portal
server to perform authentication. The IP address of the portal server is 172.20.1.1, the authentication
page URL is http://172.20.1.1/eportal.htm, the key is ru
ijie. The device communicates with ePortal
through SNMP. The device and the ePortal both belong to the community named public.
Ruijie# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)# snmp-server community public rw
Ruijie(config)# snmp-server enable traps web-auth
Ruijie(config)# snmp-server host 172.20.1.1 inform version 2c public web-auth
Ruijie(config)# http redirect 172.20.1.1
Ruijie(config)# http redirect homepage http://172.20.1.1/eportal.htm
Ruijie(config)# web-auth portal key ruijie
Ruijie(config)# wlansec 1
Ruijie(wlansec)# webauth
Ruijie(wlansec)# exit
Related
Commands
Command Description
show web-auth control
Shows the Web authentication information
corresponding to WLAN.
http redirect
Sets IP address for Ruijie first generation portal
server.
http redirect homepage
Sets homepage address of Ruijie first
generation portal server.
web-auth portal key
Sets communication key used between the
device and Ruijie first generation portal server.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English