Command Reference Syslog Commands
Configuration
Examples
The following command shows the result of the show logging command:
Ruijie# show logging
Syslog logging: enabled
Console logging: level debugging, 15495 messages logged
Monitor logging: level debugging, 0 messages logged
Buffer logging: level debugging, 15496 messages logged
Standard format: false
Timestamp debug messages: datetime
Timestamp log messages: datetime
Sequence-number log messages: enable
Sysname log messages: enable
Count log messages: enable
Trap logging: level informational, 15242 message lines logged,0 fail
logging to 202.101.11.22
logging to 192.168.200.112
Log Buffer (Total 131072 Bytes): have written 1336,
015487: *Sep 19 02:46:13: Ruijie %LINK-3-UPDOWN: Interface FastEthernet 0/24,
changed state to up.
015488: *Sep 19 02:46:13: Ruijie %LINEPROTO-5-UPDOWN: Line protocol on
Interface FastEthernet 0/24, changed state to up.
015489: *Sep 19 02:46:26: Ruijie %LINK-3-UPDOWN: Interface FastEthernet 0/24,
changed state to down.
015490: *Sep 19 02:46:26: Ruijie %LINEPROTON/A5N/AUPDOWN: Line protocol on
Interface FastEthernet 0/24, changed state to down.
015491: *Sep 19 02:46:28: Ruijie %LINKN/A3N/AUPDOWN: Interface FastEthernet
0/24, changed state to up.
015492: *Sep 19 02:46:28: Ruijie %LINEPROTO-5-UPDOWN: Line protocol on
Interface FastEthernet 0/24, changed state to up.
Log information description:
Field Description
Syslog logging Logging flag: enabled or disabled
Console logging Level of the logs printed on the console, and statistics
Monitor logging
Level of the logs printed on the VTY window, and
statistics
Buffer logging
Level of the logs recorded in the memory buffer, and
statistics.
Standard format Standard log format.
Timestamp debug messages Timestamp format of the Debug messages
Timestamp log messages Timestamp format of the Log messages
Sequence-number log messages Serial number switch
To Next Page
Loading...
Need help?
General
