HEIDENHAIN iTNC 530 HSCI - Page 1733

July 2013 9.5 Data Transfer NC > PLC, PLC > NC 1733
Read values from the active preset table
502 Line Column Read value with conversion in the
currently active coordinate system
from the preset table
503 Line Column Read value from the preset table
without conversion to the currently
active coordinate system
504 Line – Read basic rotation from the preset
table
Values from the active pallet table
510 1 – Active row
(–1 = no pallet table active)
2 – Pallet number from column Name
3 – Current row of the pallet table
4 – Last line of the NC program of the
current pallet
51 to 9
(X, Y, Z, A, B, C,
U, V, W)
Tool-oriented machining
0 = safety height not programmed
1 = safety height programmed
61 to 9
(X, Y, Z, A, B, C,
U, V, W)
Programmed clearance height in
pallet table for tool-oriented
machining
Preset table
530 1 – Active row
2 Row in the
preset table
0 = row is not write-protected
≠ 0 = row is write-protected
Pallet preset table
540 1 – Active row
Group
name
Group
number
ID....
System data
number
NR....
System data
index
IDX....
System datum