HEIDENHAIN iTNC 530 HSCI - Page 1884

1884 HEIDENHAIN Technical Manual iTNC 530 HSCI
Call:
PS B/W/D/K <>Mode>
0: Number of active clients suitable for focus assignment
1. Status of focus assignment
2: Name of the active VNC client
3: List of all clients
4: Name of client n from the client list
PS B/W/D/K <>Timeout [ms]>
Module rounds up to the next 100 ms limit
0: Default timeout 3000 ms
PS B/W/D/K <>Additional parameter 1>
Mode 0: - - -
Mode 1: - - -
Mode 2: Address of PLC string
Mode 3: Address of PLC string
Mode 4: Address of PLC string
PS B/W/D/K <>Additional parameter 2>
Mode 0: - - -
Mode 1: - - -
Mode 2: - - -
Mode 3: - - -
Mode 4: Number of clients n
CM 9287
PL B/W/D <>Error code>
0: No error
1: PLC error, error code in PLC error word (see below)
>= 100: Operating-system error
PL B/W/D <>Status>
Mode 0: Number of clients
Mode 1: Focus assignment 0/1: Enabled/disabled
Mode 2: - - -
Mode 3: - - -
Mode 4: - - -