498 HEIDENHAIN Technical Manual iTNC 530 HSCI
MP410 Assignment of axis keys IV, V and VI
Input:
Axis labels A/B/C/U/V/W/T
PLC
RUN
604
MP410.3 IV axis key
MP410.4 V axis key
MP410.5 VI axis key (only HR 5xx)
MP420.x Hirth coupling
Input: 0: No Hirth coupling
1: Hirth coupling
PLC
RUN
1532
MP430.x Prescribed increment for Hirth coupling
Input: 0.0000 to 180.0000 [°]
PLC
RUN
1532
MP708.x Traverse distance for acceleration-dependent backlash
compensation
Input: 0.0001 to 1.000 [mm]
0: Function inactive
PLC
RUN
649
MP709.x Time constant for backlash compensation
Input: 1 to 1000 [ms]
PLC
RUN
649
MP Function and input Software
version and
behavior
Page
To Next Page
Loading...
