July 2013 4.4 List of machine parameters 531
MP4030.x
Assignment of physical/logic PL (not required for HSCI systems)
MP4031 Monitoring of number of PLs (not required for HSCI
systems)
MP4040 Set PLC output after shutdown PLC
RUN
1261
MP4041 Time after shutdown until setting of the PLC output from
MP4044
Input: 0 to 1000 [s]
PLC
RUN
1261
MP4043 Delay during shutdown for the PLC to execute final actions
Input: 1 to 1000 [s]
0: No delay
PLC
RUN
1527
MP4044 PLC output to be set after shutdown
Input: Symbolic name of PLC output
0: Cannot be evaluated, results in an error message
PLC
RUN
1261
MP4045 Reserved
MP4050.0-8 Traverse distance for lubrication of axes 1 to 18
Input: 0 to 99 999.999 [m or 1000°]
PLC
RUN
629
MP4070 Compensation amount per PLC cycle for lagged-tracking
axis error compensation
Input: 0.0001 to 0.5000 [mm]
PLC
RUN
659
MP4110.0-47 Run time PLC timer T0 to T47
Input: 0 to 1 000 000.000 [s]
PLC
RUN
1749
MP4111.96-x Run time PLC timer T96 to x (defined in OEM.SYS)
Input: 0 to 1 000 000.000 [s]
PLC
RUN
1749
MP4120.0-47 PLC counter preset value
Input: 0 to 1 000 000.000 [s or PLC cycles, depending on
MP4020, bit 11]
PLC
RUN
1752
MP4130.0
MP4130.1
MP4130.2-5
Fast PLC input for switching the monitoring functions off
(with HSCI, this is also possible via MP4132.x)
Reserved
Fast PLC inputs
Input: 0 to 20 000 [Number of the PLC input or
symbolic PLC operand]
-1: Function inactive
895,
863,
1753
MP Function and input Software
version and
behavior
Page
To Next Page
Loading...
