July 2013 4.4 List of machine parameters 561
MP7480 Output of the tool or pocket number PLC
RUN
1610
MP7480.0 With TOOL CALL block
Input: 0: No output
1: Tool number output only when tool number changes
2: Tool number output for every TOOL CALL block
3: Pocket number and tool number output only when tool
number changes
4: Output of the pocket number and tool number for every
TOOL CALL block
5: Pocket number and tool number output only when tool
number changes. Pocket table is not changed.
6: Pocket number and tool number output for every TOOL
CALL block. Pocket table is not changed.
MP7480.1 With TOOL DEF block
Input: 0: No output
1: Tool number output only when tool number changes
2: Tool number output for every TOOL DEF block
3: Pocket number and tool number output only when tool
number changes
4: Pocket number and tool number output for every TOOL
DEF block
MP Function and input Software
version and
behavior
Page
To Next Page
Loading...
