Rohde & Schwarz R&S ZNA Series - Page 1021

Command reference
R&S
®
ZNA
1021User Manual 1178.6462.02 ─ 29
LORight
Lower end of the port range on the right
Options: R&S ZNA-K220 | R&S ZNA-K230 | R&S ZNA-K210
Manual operation: See "Measure / Apply section" on page 763
CALCulate:FMODel:DEASsistant:DUT:TYPE <ScpiDutType>
Selects the DUT type for the "Deembedding Assistant".
Depending on the number of available test/DUT ports and the selected fixture tool
(CALCulate:FMODel:DEASsistant:TOOL), choose the appropriate <DutType>.
Parameters:
<DutType> SEX | SEXSe | BX | BXB | BXSE | SE21 | SE22 | NXSE |
NXMSe | NXB | NXMB
SEX
1 x single-ended
SEXSe
1 x 1 single-ended
BX
1 x balanced
BXB
1 x 1 balanced
BXSE
1 x balanced, 1 x single-ended (ISD only)
SE21
2 x 1 single-ended (ISD only)
SE22
2 x 2 single-ended (ISD only)
NXSE
n x single-ended (ISD only)
NXMSe
n x m single-ended (ISD only)
NXB
n x balanced (ISD only)
NXMB
n x m balanced (ISD only; currently not supported )
Options:
R&S ZNA-K220 | R&S ZNA-K230 | R&S ZNA-K210
Manual operation: See "DUT" on page 757
SCPI command reference