Ruijie RG-WLAN Series Rgos Command Reference

Command Reference Basic Management Commands
Examples
Ruijie(config-line)#exec-timeout 5 output
Command Description
Related
Commands
N/A N/A
Platform
Description
None
speed
To set the speed at which the terminal transmits packets, run the speed speed command in line
configuration mode. To restore the speed to its default, run the no speed command.
speed speed
Parameter Description
Parameter
Description
speed
Transmission rate (bps) on the terminal. For serial ports, optional rates include 9600,
19200, 38400, 57600, and 115200 bps. The default rate is 9600 bps.
Defaults
The default rate is 9600.
Command
Mode
Global configuration mode
Usage Guide
This command is used to set the speed at which the terminal transmits packets.
Configuration
Examples
The following example shows how to set the rate of the serial port to 57600 bps:
Ruijie(config)# line console 0
Ruijie(config-line)# speed 57600
Command Description
Related
Commands
N/A N/A
Platform
Description
None
write
Use this command to save running-config to a specified location.
write [ memory | network | terminal ]
Parameter Description Parameter
Description
memory
Writes the system configuration (running-config) into NVRAM, which is equivalent

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English