Ruijie RG-WLAN Series

Command Reference Dot11 Radio Commands
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
coverage-area-control
Use this command to set the power of transmitting beacon, or to control the coverage area of wireless
signals.
coverage-area-control power-value
no coverage-area-control
Parameter
Description
Parameter Description
no
Restores the default setting.
power-value
Specifies the coverage area. The range is from 0 to 32.
Defaults
The default value is 0.
Command
mode
Dot11radio interface configuration mode
Usage Guide
N/A
Configuration
Examples
# Set the coverage area of wireless signals.
Ruijie(config)#interface dot11radio 1/0
Ruijie(config-if-Dot11radio 1/0)# coverage-area-control 12
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
mcast_rate
Use this command to set multicast rate.
mcast_rate { 11 | 24 | 54 | 65 | 78 | 104 | 130 }
no mcast_rate