Ruijie RG-WLAN Series

Command Reference FTP Server Commands
ftp-server enable
no ftp-server enable
Parameter
Description
Parameter Description
N/A N/A
Defaults
Disabled
Command
Mode
Global configuration mode.
Usage Guide
This command is used to enable the FTP server to connect the FTP client to upload/download the
files.
To enable the FTP client to access to the FTP server files, this command shall be
co-used with the ftp-server topdir command.
Configuration
Examples
The following example shows how to enable the FTP Server and make the FTP client access to the
syslog content only:
Ruijie(config)# ftp-server topdir /syslog
Ruijie(config)# ftp-server enable
The following example shows how to disable the FTP Server:
Ruijie(config)# no ftp-server enable
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
ftp-server password
Use this command to set the login password for the FTP server. Use the no form of this command to
cancel the password configuration.
ftp-server password [ type ] password
no ftp-server password