Command Reference FTP Server Commands
Parameter
Description
Parameter Description
type
Define the encryption type of the password: 0 or 7. The default type is
0.
0 indicates the password is not encrypted.
7 indicates the password is encrypted.
password
The login password for the FTP server.
Defaults
By default, there is no password.
Command
Mode
Global configuration mode.
Usage Guide
For the FTP server, the login username and the login password must be configured to verify the client
connection. One password can be set at most.
The password must include the letter or number. The space in front of / behind the password is
allowed, but it is ignored. While the space in the middle of the password is a part of password.
The minimum and maximum lengths of the plain-text password are 1 character and 25 characters.
The minimum and maximum lengths of the encrypted password are 4 characters and 52 characters
respectively.
The encrypted password is generated by plain-text password encryption and its format must comply
with the encryption specification. If the encrypted password is used for the setting, the client must use
the corresponding plain-text password for the purpose of successful login.
Null password is not supported by the FTP server. Without the password configuration,
the client fails to pass the identity verification of the server.
Configuration
Examples
The following example shows how to set the plain-text password as pass:
Ruijie(config)# ftp-server password pass
OR:
Ruijie(config)# ftp-server password 0 pass
The following example shows how to set the cipher-text password as 8001:
Ruijie(config)# ftp-server password 7 8001
The following example shows how to delete the password configuration:
Ruijie(config)# no ftp-server password
Related
Commands
Command Description
N/A N/A
To Next Page
Loading...
Need help?
General
