Command Reference DHCPv6 Server Commands
show ipv6 dhcp binding
Use this command to display the address bindings of a DHCPv6 server.
show ipv6 dhcp binding [ipv6-address]
Parameter Description
Parameter
Description
ipv6-address
IPv6 address or prefix
Default
Configuration
N/A
Command
Mode
Privileged EXEC mode
Function
Description
If you do not specify ipv6-address, all the prefixes dynamically assigned to clients and IANA
address bindings are displayed. If you specify ipv6-address, only the DHCPv6 binding for the
specified IPv6 address will be displayed.
Configuration
Examples
The following example displays DHCPv6 bindings.
Ruijie# show ipv6 dhcp binding
Client DUID: 00:03:00:01:00:d0:f8:22:33:ac
IAPD: iaid 0, T1 1800, T2 2880
Prefix: 2001:20::/72
preferred lifetime 3600, valid lifetime 3600
expires at Jan 1 2008 2:23 (3600 seconds)
Command Description
Related
Commands
N/A N/A
Platform
Description
N/A
show ipv6 dhcp interface
Use this command to display the DHCPv6 interface information.
show ipv6 dhcp interface [interface-name]
Parameter
Parameter Description
To Next Page
Loading...
