Ruijie RG-WLAN Series Rgos Command Reference

Command Reference Web Authentication Commands
Parameter
Description
Parameter Description
ip-address
The parameter indicates the IP address of an authentication-free
network resource.
ipv6-address
IPv6 address of an authentication-free network resource.
ip-mask
(Optional) The parameter indicates the IP address mask of an
authentication-free network resource.
arp
(Optional) If the ARP CHECK function is enabled on the access
device, the IP address, including the VRRP address of the gateway
uplinked with terminal users must be configured as
authentication-free resource with the keyword arp. Other
authentication-free resources do not need to carry the keyword arp.
Defaults
By default, no authentication-free network resource is configured.
Command
mode
Global configuration mode
Usage Guide
After Web authentication is enabled, all users need to pass Web authentication for accessing the
network resources. To open certain network resources to the unauthenticated users, run this
command. When a Website is an authentication-free network resource, all users can access the
Website.
You can configure a maximum of 100 authentication-free network resources.
Configuration
Examples
#Set the Website with the IP address of 172.16.0.0 as an authentication-free network resource.
Ruijie(config)# http redirect direct-site 172.16.0.1
Related
Commands
Command Description
show http redirect
Shows the configuration of HTTP redirection.
Platform
Description
N/A
http redirect direct-arp
Use this command to configure the address range of direct ARP. Use the no form of this command to
remove the configuration.
http redirects direct-arp { ip-address [ ip-mask ] | local-address }
no http redirects direct-arp { ip-address [ ip-mask ] | local-address }
Parameter
Description
Parameter Description

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English