Ruijie RG-WLAN Series Rgos Command Reference

Command Reference Web Authentication Commands
ip-address
This parameter indicates the IP address range of direct ARP.
ip-mask
(Optional) This parameter indicates the IP address mask of direct
ARP.
local-address
This parameter indicates the configuration of the local direct ARP.
Defaults
By default, no direct arp resource is configured.
Command
mode
Global configuration mode
Usage Guide
After web authentication and ARP check are enabled, ARP messages of unauthenticated terminals
will be intercepted. The terminal cannot learn the gateway arp or initiate HTTP requests. This
command discharges the ARP messages with the specified IP address to help the terminal learn the
gateway ARP.
In general, while using the external web authentication, configure the released gateway arp; while
using the built-in web authentication, configure the released host arp.
Configuration
Examples
#Configure the direct gateway ARP with the IP address 172.16.0.1.
Ruijie(config)# http redirect direct-arp 172.16.0.1
Related
Commands
Command Description
show http redirect
Shows the configuration of HTTP redirection.
Platform
Description
N/A
http redirect homepage
Use this command to set the authentication homepage address of the Portal server. Use the no form
of this command to delete the address of the authentication homepage.
http redirects homepage url-string
no http redirect homepage
Parameter
Description
Parameter Description
url-string
The homepage address must begin with http:// or https://. Otherwise,
the system prompts configuration failure. The maximum length of the
homepage address is 255 characters.
Defaults
By default, the homepage address of the authentication page is not specified.
Command
mode
Global configuration mode

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English