Ruijie RG-WLAN Series Rgos Command Reference

Command Reference WLAN Basic Configuration Commands
The default limit value of the following APs : 180
AP320-I v1.0, AP220-E(M)-V2 v3.0, AP320-I v1.1
AP3220 v1.0, AP220-E(P) v1.0, AP220-E(C) v4.0
AP220-E(M)-V2 v3.9
The default limit value of the following APs: 64
AP330-I v1.1, AP220-E(P) v2.0
The default limit value of other APs: 25
Command
Mode
AP configuration mode
Usage Guide
N/A
Configuration
Examples
Example 1: Enter the configuration mode of AP0001 and set the value of the received package limit
per time to 100.
Ruijie(config)# ap- config AP0001
Ruieji(config-ap)# eth-schd 100
Command Description Related
Commands
N/A N/A
Platform
Description
Supported by both AC and AP.
ldpc
As part of FEC (Forward Error Correction) technology, LDPC is a simple and easily-implemented linear
error correcting code developed in the early 1960s that used in the data transmission over noisy
channels to improve the coding reliablity and coding gain,so as to reduce the risk of data loss. However,
only few terminals are incomparible with LDPC, featuring package loss. This command is used to
enable or disable this function.
[no] ldpc radio radio id
Parameter Description Parameter
Description
radio-id
ID of the radio to be configured.
Defaults
By default, this function is enabled.
Command
Mode
AP configuration mode

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English