Reference Guide 102 Document #: LTRT-17939
Mediant MSBR
6.3.6 show data bridge-configuration
This command displays the Ethernet bridging configuration.
Syntax
show data bridge-configuration
Command Mode
Basic User and Privileged User
Note
This command is applicable only to data-router functionality.
Example
This example displays the Ethernet bridging configuration:
show data bridge-configuration
6.3.7 show data cellular
This command, run on Mediant 800 MSBR devices with the appropriate hardware revision,
displays Internet connections configured via a cellular 3G modem connected to the USB port.
Syntax
show data cellular
Command Description
Displays the running configuration.
Displays the current status of the cellular interface.
Command Mode
Basic User and Privileged User
Note
This command is applicable only to data-router functionality.
Example
This example displays the current status of the cellular interface:
show data cellular