AudioCodes Mediant MSBR Series

Reference Guide 632 Document #: LTRT-17939
Mediant MSBR
Command Mode
Privileged User
Example
This example enables l2tp port-triggering:
(config-data)# ip port-triggering l2tp
75.2.1.5 ip port-map
This command enables Application-Level Gateway (ALG) configuration commands.
Syntax
ip port-map sip disable
ip port-map sip <start_dest_port> [end_dest_port]
ip port-map rtsp disable
ip port-map rtsp <start_dest_port> [end_dest_port]
ip port-map pptp disable
ip port-map pptp <start_dest_port> [end_dest_port]
ip port-map msn disable
ip port-map msn <start_dest_port> [end_dest_port]
ip port-map mgcp disable
ip port-map mgcp <start_dest_port> [end_dest_port]
ip port-map l2tp disable
ip port-map l2tp <start_dest_port> [end_dest_port]
ip port-map ike disable
ip port-map ike <start_dest_port> [end_dest_port]
ip port-map h323_ras disable
ip port-map h323_ras <start_dest_port> [end_dest_port]
ip port-map h323_cs disable
ip port-map h323_cs <start_dest_port> [end_dest_port]
ip port-map ftp disable
ip port-map ftp <start_dest_port> [end_dest_port]
ip port-map dns disable
ip port-map dns <start_dest_port> [end_dest_port]
ip port-map dhcpv6 disable
ip port-map dhcp disable
ip port-map aim disable
ip port-map aim <start_dest_port> [end_dest_port]
Command Description
start_dest_port Defines the Destination Port (1-65535).
end_dest_port Defines the End Destination Port (1-65535).
Default
NA