AudioCodes Mediant MSBR Series

Reference Guide 92 Document #: LTRT-17939
Mediant MSBR
5.37 debug voip
This command debugs voice over IP channels.
# debug voip
Command Description
activate-channel
{analog|digital|virtual}
<Channel ID>
Configures a specific channel.
close-channels
{analog|digital|virtual}
Closes channels. To view the orientation of the
device's hardware, use the command, show system
assembly.
dial-string
{analog|digital|virtual}
Sends a string of DTMF tones. To view the
orientation of the device's hardware, use the
command, show system assembly.
interface {bri|e1-t1}
Debugs tools related to the PSTN interface (BRI or
E1/T1).
open-and-activate
{analog|digital|virtual}
Opens and activates a channel. To view the
orientation of the device's hardware, use the
command, show system assembly.
open-channel
{analog|digital|virtual
}
<Channel ID>
Opens a channel .
wait-for-detection
Waits for a digit detection event