AudioCodes Mediant MSBR Series User Manual (English)

To Next Page

To Previous Page

Version 7.2 355 Mediant MSBR

Reference Guide 59. gateway

Command Mode

Privileged User

Note

To view the port-module numbers and port type, enter the display command at the index

prompt, for example:

(authentication-0)# display

Example

This example configures authentication credentials for a port:

(config-voip)# gateway analog authentication 0

(authentication-0)# password 1234

(authentication-0)# user-name JDoe

59.2.2 automatic-dialing

This command configures the Automatic Dialing table, which lets you define telephone

numbers that are automatically dialed when FXS or FXO ports go off-hook.

Syntax

(config-voip)# gateway analog automatic-dialing <Index>

(automatic-dialing-<Index>)#

Command Description

auto-dial-status

{disable|enable|hotline}

Enables automatic dialing.

dst-number Defines the destination telephone number to automatically

dial.

hotline-dia-ltone-duration

Defines the duration (in seconds) after which the

destination phone number is automatically dialed.

Command Mode

Privileged User

Note

To view the port-module numbers and port type, enter the display command at the index

prompt, for example:

(automatic-dialing-0)# display

Example

This example configures automatic dialing where the number dialed is 9764401:

(config-voip)# gateway analog automatic-dialing 0

Other manuals for AudioCodes Mediant MSBR Series

Need help?

Do you have a question about the AudioCodes Mediant MSBR Series and is the answer not in the manual?

General