Version 7.2 505 Mediant MSBR
Reference Guide 73. WAN Access Commands
Syntax
tty <tty-value>
Command Description
<tty-value> Defines the “first”, “last” or a number between 0 and 11.
If set to first, the first responsive serial interface is used.
If set to last, the highest numbered interface is used.
Default
The default TTY value is “last”.
Command Mode
Privileged User
Example
This example sets the TTY instance:
(config-data)# interface cellular 0/0
(conf-cellular)# tty 0
73.2.7 pin
This command sets the 4-digit Personal Identification Number (PIN) code required for the
SIM card installed in the modem.
Use the "no" form of this command to remove the PIN.
This command is available in the “conf-cellular” configuration context.
Syntax
pin <code>
Default
The default setting is "no pin".
Command Mode
Privileged User
Example
This example sets the PIN code:
(config-data)# interface cellular 0/0
(conf-cellular)# pin 1234
To Next Page
Loading...
