AudioCodes Mediant MSBR Series - Quality-Of-Service-Rules

Reference Guide 438 Document #: LTRT-17939
Mediant MSBR
Command Description
Direction {device-
side|remote-side}
Defines the monitoring direction.
major-hysteresis-red
Defines the amount of fluctuation (hysteresis) from the
Major threshold, configured by the 'Major Threshold
(Red)' parameter in order for the threshold to be
considered as crossed.
major-threshold-red
Defines the Major threshold value, which is the upper
threshold located between the Yellow and Red states. To
consider a threshold crossing:
minor-hysteresis-yellow
Defines the amount of fluctuation (hysteresis) from the
Minor threshold, configured by the 'Minor Threshold
(Yellow)' parameter in order for the threshold to be
considered as crossed.
minor-threshold-yellow
Defines the Minor threshold value, which is the lower
threshold located between the Yellow and Green states.
monitored-parameter
{delay|jitter|mos|packe
t-loss|rerl}
Defines the parameter to monitor and report.
sensitivity-level
{high-sensitivity|low-
sensitivity|med-
sensitivity|user-
defined}
Defines the sensitivity level of the thresholds.
Command Mode
Privileged User
Example
This example configures a Quality of Experience Color Rule for MOS, where a Major alarm
is considered if MOS is less than 2:
(config-voip)# qoe qoe-profile 0
(qoe-profile-0)# qoe-color-rules 1
(qoe-color-rules-0/1)# monitored-parameter mos
(qoe-color-rules-0/1)# major-threshold-red 20
(qoe-color-rules-0/1)# major-hysteresis-red 0.1
(qoe-color-rules-0/1)# activate
66.4 quality-of-service-rules
This command configures the Quality of Service Rules table, which lets you define Quality of
Service rules.
Syntax
(config-voip)# qoe quality-of-service-rules <Index>
(quality-of-service-rules-<Index>)#