AudioCodes Mediant MSBR Series User Manual

Version 7.2 455 Mediant MSBR
Reference Guide 68. sbc
Example
This example configures an IP Group Set Member with IP Group "SIP-Trunk":
(config-voip)# sbc routing ip-group-set 0
(ip-group-set-0)# ip-group-set-member 1
(ip-group-set-member-0/1)# ip-group-name SIP-Trunk
(ip-group-set-member-0/1)# weight 9
(ip-group-set-member-0/1)# activate
68.6.3 ip2ip-routing
This command configures the IP-to-IP Routing table, which lets you define SBC IP-to-IP
routing rules.
Syntax
(config-voip)# sbc routing ip2ip-routing <Index>
(ip2ip-routing-<Index>)#
Command Description
alt-route-options
{alt-route-consider-
inputs|alt-route-
ignore-inputs|group-
member-consider-
inputs|group-member-
ignore-inputs|route-
row}
Determines whether this routing rule is the main routing
rule or an alternative routing rule (to the rule defined
directly above it in the table).
call-setup-rules-set-
id
Assigns a Call Setup Rule Set ID to the routing rule.
cost-group
Assigns a Cost Group to the routing rule for determining
the cost of the call.
dest-sip-interface-
name
Defines the destination SIP Interface to where the call is
sent.
dest-tags
Assigns a prefix tag to denote destination URI user names
corresponding to the tag configured in the associated Dial
Plan.
dst-address
Defines the destination address to where the call is sent.
dst-host
Defines the host part of the incoming SIP dialog’s
destination URI (usually the Request-URI).
dst-ip-group-name
Defines the IP Group to where you want to route the call.
dst-port
Defines the destination port to where the call is sent.
dst-transport-type
{tcp|tls|udp]
Defines the transport layer type for sending the call.

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English