AudioCodes Mediant MSBR Series

Reference Guide 88 Document #: LTRT-17939
Mediant MSBR
5.33 debug syslog-server
This command configures the IP address and port of the Syslog server.
Syntax
# debug syslog-server <IP Address> port <Port Number>
Command Description
IP Address Configures the IP address of the Syslog server.
port
Configures the port number of the Syslog server.
Note
To disable Syslog server debugging, use the following command:
# no debug syslog-server
Command Mode
Privileged User
Example
Enabling Syslog by configuring the Syslog server:
# debug syslog-server 10.15.1.0 port 514
Syslog enabled to dest IP Address: 10.15.1.0 Port 514