AudioCodes Mediant MSBR Series

Reference Guide 366 Document #: LTRT-17939
Mediant MSBR
Command Description
ip-to-tel-interworking
{disable|enable}
Enables IP-to-Tel Interworking.
name Defines a name.
Command Mode
Privileged User
Example
This example configures supplementary service for port 2:
(config-voip)# gateway digital rp-network-domains 0
(rp-network-domains-0)# ip-to-tel-interworking enable
(rp-network-domains-0)# name dsn
(rp-network-domains-0)# activate
59.3.2 settings
This command configures various digital settings.
Syntax
(config-voip)# gateway digital settings
(gw-digital-settings>)#
Command Description
911-location-id-in-ni2
Enables 911 Location Id in NI2 protocol.
add-ie-in-setup
Additional information element to send in ISDN Setup
message.
add-pref-to-redir-nb
Prefix added to Redirect phone number.
amd-tiemout
AMD Detection Timeout <msec>.
answer-detector-cmd
b-ch-negotiation
ISDN B-Channel negotiation mode.
binary-redirect
Search for Redirect number coded in binary 4 bit style.
blind-xfer-add-prefix
Add keying sequence for performing blind transfer as
transfer number prefix.
blind-xfer-disc-tmo
Maximum time (milliseconds) to wait for disconnect from
Tel before performing blind transfer.
as-sndhook-flsh
Hookflash forwarding.
cic-support
Enables CIC -> ISDN TNS IE interworking.
cid-notification
If NO PRESENTATION arrived from PSTN and this
parameter enabled, presentation is allowed. If this
parameter is disabled, presentation is restricted.
cind-mode
Charge Indicator Mode.