Reference Guide 5. Debug Commands
Version 7.2 81 Mediant MSBR
5.26 debug rip
This command configures Routing Information Protocol (RIP) which enables routing
information to be exchanged between routers.
Syntax
# debug rip
Command Description
Debugs RIP events
packet {recv
[detail]|send
[detail]}
Debugs RIP packets:
 recv (Debugs only RIP packets received)
 send (Debugs only RIP packets sent)
zebra
Debugs Zebra routing software. Zebra provides TCP/IP
based routing services.
Command Mode
Privileged User
Note
This command is applicable only to data-router functionality.
Example
This example debugs RIP packets sent:
# debug rip packet send detail
To Next Page
Loading...
Need help?
General
