AudioCodes Mediant MSBR Series User Manual

Version 7.2 293 Mediant MSBR
Reference Guide 41. dhcp-server
41.3 dhcp-server server
This command configures the DHCP Servers table, which defines DHCP servers.
Syntax
(config-network)# dhcp-server server <Index>
(server-<Index>)#
Command Description
boot-file-name
Configures the name of the boot file image for the DHCP
client.
dns-server-1
Configures the IP address (IPv4) of the primary DNS
server that the DHCP server assigns to the DHCP client.
dns-server-2
Configures the IP address (IPv4) of the secondary DNS
server that the DHCP server assigns to the DHCP client.
end-address
Configures the ending IP address (IPv4 address in dotted-
decimal format) of the IP address pool range used by the
DHCP server to allocate addresses.
expand-boot-file-name
{no|yes}
Enables the use of the placeholders in the boot file name,
defined in 'boot-file-name'.
lease-time
Configures the duration (in minutes) of the lease time to a
DHCP client for using an assigned IP address.
netbios-node-type
{broadcast|hybrid|mixe
d|peer-to-peer}
Configures the NetBIOS (WINS) node type.
netbios-server
Configures the IP address (IPv4) of the NetBIOS WINS
server that is available to a Microsoft DHCP client.
network-if
Assigns a network interface to the DHCP server.
ntp-server-1
Configures the IP address (IPv4) of the primary NTP
server that the DHCP server assigns to the DHCP client.
ntp-server-2
Configures the IP address (IPv4) of the secondary NTP
server that the DHCP server assigns to the DHCP client.
override-router-
address
Configures the IP address (IPv4 in dotted-decimal
notation) of the default router that the DHCP server
assigns the DHCP client.
sip-server
Configures the IP address or DNS name of the SIP server
that the DHCP server assigns the DHCP client.
sip-server-type
{dns|IP}
Configures the type of SIP server address.
start-address
Configures the starting IP address (IPv4 address in dotted-
decimal format) of the IP address pool range used by the
DHCP server to allocate addresses.
subnet-mask
Configures the subnet mask (for IPv4 addresses) for the
DHCP client.

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English