AudioCodes Mediant MSBR Series User Manual

Version 7.2 233 Mediant MSBR
Reference Guide 18. ldap
18 ldap
This command configures LDAP and includes the following subcommands:
 ldap-configuration (see Section 18.1)
 ldap-server-groups (see Section 18.1.1)
 settings (see Section 18.3)
18.1 ldap ldap-configuration
This command configures the LDAP Servers table, which lets you define LDAP servers.
Syntax
(config-system)# ldap ldap-configuration <Index>
(ldap-configuration-<Index>)#
Command Description
bind-dn
Configures the LDAP server's bind Distinguished
Name (DN) or username.
domain-name
Configures the domain name (FQDN) of the LDAP
server.
interface
Configures the interface on which to send LDAP
queries.
ldap-servers-search-
dns
Defines the LDAP Search DN table, which lets you
define LDAP base paths per LDAP Servers table.
For more information, see Section 18.1.1.
max-respond-time
Configures the duration (in msec) that the <device>
waits for LDAP server responses.
mgmt-attr
Configures the LDAP attribute name to query, which
contains a list of groups to which the user is a
member of.
mgmt-ldap-groups
Defines the Management LDAP Groups table, which
lets you define an access level per management
groups per LDAP Servers table. For more
information, see Section 18.1.2.
password
Configures the user password for accessing the
LDAP server during connection and binding
operations.
server-group
Assigns the LDAP server to an LDAP Server Group,
configured in the LDAP Server Groups table.
server-ip
Configures the LDAP server's IP address.
server-port
Configures the LDAP server's port.
tls-context
Assigns a TLS Context if the connection with the
LDAP server is TLS.
use-tls {no|yes}
Enables the <device> to encrypt the username and
password (for Control and Management related

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English