AudioCodes Mediant MSBR Series User Manual

Reference Guide 432 Document #: LTRT-17939
Mediant MSBR
Command Description
proxy-name
Defines a descriptive name, which is used when
associating the row in other tables.
proxy-redundancy-mode
{homing|not-
configured|parking}
Determines whether the <device> switches from a
redundant proxy to the primary proxy when the primary
proxy becomes available again.
sbcipv4-sip-int-name
Assigns an IPv4-based SIP Interface for SBC calls to the
Proxy Set.
sbcipv6-sip-int-name
Assigns an IPv6-based SIP Interface for SBC calls to the
Proxy Set.
srd-name
Assigns an SRD to the Proxy Set.
success-detect-int
Defines the interval (in seconds) between each keep-
alive
retries (as configured by the 'Success Detection Retries'
parameter) that the device performs for offline proxies.
success-detect-retries
Defines the minimum number of consecutive, successful
keep-alive messages that th
e <device> sends to an offline
proxy, before the <device> considers the proxy as being
online.
tls-context-name
Assigns a TLS Context (SSL/TLS certificate) to the Proxy
Set.
Command Mode
Privileged User
Example
This example configures proxy keep-alive and redundancy:
(config-voip)# proxy-set 0
(proxy-set-0)# proxy-enable-keep-alive using-options
(proxy-set-0)# is-proxy-hot-swap enable
(proxy-set-0)# proxy-redundancy-mode homing
(proxy-set-0)# activate
65.1 proxy-ip
This command configures the Proxy Address table, which defines addresses for the Proxy
Set. The table is a child of the Proxy Sets table.
Syntax
(config-voip)# proxy-set <Index>
(proxy-set-<Index>)# proxy-ip <Index>
(proxy-ip-<Index>/<Index>)#

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English